EasyManuals Logo

Yealink SIP-T41S Administrator's Guide

Yealink SIP-T41S
572 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #515 background imageLoading...
Page #515 background image
Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
512
Permitted
Values
String within 99 characters
Default
Blank
Supported
Devices
All phones except T48G, T46G, T42G, T41P and T29G
Parameter
bw.virtual_user.1.xsi.password <MAC>.cfg
Description
It configures the password of virtual account for XSI access authentication.
Note: It works only if “bw.xsi.enable is set to 1 (Enabled) and it is required only when “sip.au-
thentication_for_xsi is set to 0 (User Login Credentials for XSI Authentication).
Permitted
Values
String within 99 characters
Default
Blank
Supported
Devices
All phones except T48G, T46G, T42G, T41P and T29G
Parameter
bw.virtual_user.1.xsi.host <MAC>.cfg
Description
It configures the IP address of the Xtended Services Platform server for the virtual account.
Note: It works only if “bw.xsi.enable is set to 1 (Enabled).
Permitted
Values
IP address or domain name
Default
Blank
Supported
Devices
All phones except T48G, T46G, T42G, T41P and T29G
Parameter
bw.virtual_user.1.xsi.server_type <MAC>.cfg
Description
It configures the access protocol of the Xtended Services Platform server for the virtual account.
Note: It works only if “bw.xsi.enable is set to 1 (Enabled).
Permitted
Values
HTTP or HTTPS
Default
Blank
Supported
Devices
All phones except T48G, T46G, T42G, T41P and T29G
Parameter
bw.virtual_user.1.xsi.port <MAC>.cfg
Description
It configures the port of the Xtended Services Platform server for the virtual account.
Note: It works only if “bw.xsi.enable is set to 1 (Enabled).
Permitted
Values
Integer from 1 to 65535
Default
80
Supported
Devices
All phones except T48G, T46G, T42G, T41P and T29G
Parameter
account.X.bw_disp_code.Y
[1][2]
<MAC>.cfg
Description
It configures the disposition code which must match one of the codes configured on BroadWorks.
Permitted
Values
Integer from 1 to 2147483647

Table of Contents

Other manuals for Yealink SIP-T41S

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T41S and is the answer not in the manual?

Yealink SIP-T41S Specifications

General IconGeneral
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Product colorBlack
Keypad illuminationYes
Wi-FiNo
Networking standardsIEEE 802.3af
Ethernet LAN data rates10, 100 Mbit/s
Ethernet LAN interface typeFast Ethernet
Supported network protocolsSIP v1, SIP v2, LLDP/CDP/DHCP, OpenVPN, IEEE802.1X, IPv6, FTP/TFTP/HTTP/HTTPS
Volume controlDigital
Number of programmable keys6
Lines quantity6 lines
Phonebook capacity1000 entries
Dual-Tone Multi-Frequency (DTMF) modesIn-band, Out-of band, SIP info
Input frequency50/60 Hz
AC adapter input voltage100 - 240 V
AC adapter output current1.2 A
AC adapter output voltage5 V
Display diagonal2.7 \
Display resolution192 x 64 pixels
Operating temperature (T-T)-10 - 50 °C
Operating relative humidity (H-H)10 - 95 %
Voice codecsCNG, G.711Mu, G.711a, G.723.1, G.726, G.729ab, VAD, iLBC
CertificationCE
Cables includedLAN (RJ-45)
Number of handles included1 pc(s)
Harmonized System (HS) code85171800
Weight and Dimensions IconWeight and Dimensions
Depth189 mm
Width212 mm
Height175 mm
Package depth223 mm
Package width246 mm
Package height120 mm

Related product manuals