EasyManuals Logo

Yealink SIP-T41S Administrator's Guide

Yealink SIP-T41S
572 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #523 background imageLoading...
Page #523 background image
Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
520
Default
GroupCommon
Web UI
Applications > Broadsoft XSI > Network Directory > Group Common
Parameter
bw.xsi.directory.alphabetized_by_lastname.enable <y0000000000xx>.cfg
Description
It configures the call ID (first name and last name) display method when the phone receives an incom-
ing call, places an outgoing call or is during an active call.
Permitted
Values
0-First name Last name
1-Last name, First name
Default
0
Supported
Devices
All phones except CP920
Parameter
bw.calllog_and_dir <y0000000000xx>.cfg
Description
It enables or disables the phone to directly enter the Network Calls screen when pressing the History
soft key on the idle screen.
Note: It works only if "bw.xsi.call_log.enable" is set to 1 (Enabled).
Permitted
Values
0-Disabled, the phone will enter Local Calls screen when pressing the History soft key.
1-Enabled
Default
0
Parameter
search_in_dialing.bw_directory.enable <y0000000000xx>.cfg
Description
It enables or disables the phone to automatically search entries from the BroadSoft directory, and dis-
play the results on the pre-dialing/dialing screen.
Permitted
Values
0-Disabled
1-Enabled
Default
0
Parameter
search_in_dialing.bw_directory.priority <y0000000000xx>.cfg
Description
It configures the search priority of the BroadSoft directory.
Permitted
Values
Integer greater than or equal to 0
Default
5
Parameter
directory_setting.bw_directory.enable <y0000000000xx>.cfg
Description
It enables or disables the users to access the BroadSoft directory by pressing the Directory/Dir soft
key.
Permitted
Values
0-Disabled
1-Enabled
Default
0
Parameter
directory_setting.bw_directory.priority <y0000000000xx>.cfg
Description
It configures the display priority of the BroadSoft directory.
Permitted
Values
Integer greater than or equal to 0
Default
6

Table of Contents

Other manuals for Yealink SIP-T41S

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T41S and is the answer not in the manual?

Yealink SIP-T41S Specifications

General IconGeneral
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Product colorBlack
Keypad illuminationYes
Wi-FiNo
Networking standardsIEEE 802.3af
Ethernet LAN data rates10, 100 Mbit/s
Ethernet LAN interface typeFast Ethernet
Supported network protocolsSIP v1, SIP v2, LLDP/CDP/DHCP, OpenVPN, IEEE802.1X, IPv6, FTP/TFTP/HTTP/HTTPS
Volume controlDigital
Number of programmable keys6
Lines quantity6 lines
Phonebook capacity1000 entries
Dual-Tone Multi-Frequency (DTMF) modesIn-band, Out-of band, SIP info
Input frequency50/60 Hz
AC adapter input voltage100 - 240 V
AC adapter output current1.2 A
AC adapter output voltage5 V
Display diagonal2.7 \
Display resolution192 x 64 pixels
Operating temperature (T-T)-10 - 50 °C
Operating relative humidity (H-H)10 - 95 %
Voice codecsCNG, G.711Mu, G.711a, G.723.1, G.726, G.729ab, VAD, iLBC
CertificationCE
Cables includedLAN (RJ-45)
Number of handles included1 pc(s)
Harmonized System (HS) code85171800
Weight and Dimensions IconWeight and Dimensions
Depth189 mm
Width212 mm
Height175 mm
Package depth223 mm
Package width246 mm
Package height120 mm

Related product manuals