EasyManuals Logo

Yealink SIP-T48U Administrator's Guide

Yealink SIP-T48U
572 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #130 background imageLoading...
Page #130 background image
Using Handsets with T57W/T54W/T53W/T53 Phones
127
Handset Wallpaper
Wallpaper is an image used as the background for the handset idle screen. Users can select an image from hand-
set’s built-in background.
Topic
Handset Wallpaper Configuration
Handset Wallpaper Configuration
The following table lists the parameter you can use to configure the handset wallpaper.
Parameter
custom.handset.wallpaper <y0000000000xx>.cfg
Description
It configures the wallpaper displayed on the handset LCD screen.
Note: It will take effect on all handsets that are registered on the same phone. It works only if “stat-
ic.auto_provision.handset_configured.enable is set to 1 (Enabled).
Permitted
Values
1-Wallpaper1
2-Wallpaper2
3-Wallpaper3
4-Wallpaper4
5-Wallpaper5
Default
-1, do not change the wallpaper set on each handset.
Supported
Devices
W53H, W56H
Handset UI
OK > Settings > Display > Wallpaper
Handset Screen Saver
The screen saver of the handset is designed to protect your LCD screen. You can enable the screen saver to pro-
tect the LCD screen, an analog clock will be activated and appear on the LCD screen after the handset is idle for
approximately 10 seconds.
It is only applicable to W56H/W53H handsets.
Topic
Handset Screen Saver Configuration
Handset Screen Saver Configuration
The following table lists the parameter you can use to configure the handset screen saver.
Parameter
custom.handset.screen_saver.enable
[1]
<y0000000000xx>.cfg
Description
It enables or disables screen saver feature.
Note: It will take effect on all handsets that are registered on the same phone. It works only if “stat-
ic.auto_provision.handset_configured.enable is set to 1 (Enabled).
Permitted
Values
-1-Do not modify the configuration.
0-Disabled
1-Enabled, an analog clock will be activated and appear on the LCD screen if no user activity is
sensed for approximately 10 seconds.

Table of Contents

Other manuals for Yealink SIP-T48U

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T48U and is the answer not in the manual?

Yealink SIP-T48U Specifications

General IconGeneral
Handset typeWired handset
Product typeIP Phone
Product colorGray
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Expansion module supportYes
Ethernet LAN (RJ-45) ports2
Display diagonal7 \
Display resolution800 x 480 pixels
Lines quantity- lines
Phonebook capacity1000 entries
Number of VoIP accounts16
Voice codecsAGC, AJB, AMR-WB, CNG, G.711, G.722, G.723.1, G.726, G.729ab, VAD, iLBC
Security algorithmsAES, HTTPS, SRTP, TLS
Ethernet LAN data rates10, 100, 1000 Mbit/s
Ethernet LAN interface typeGigabit Ethernet
Front camera-
AC adapter input voltage100 - 240 V
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)10 - 95 %
Keypad number of keys29
Number of handles included1 pc(s)
Harmonized System (HS) code85171800
Weight and Dimensions IconWeight and Dimensions
Width226 mm
Height185 mm

Related product manuals