EasyManuals Logo

Yealink SIP-T48U Administrator's Guide

Yealink SIP-T48U
572 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #265 background imageLoading...
Page #265 background image
Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
262
Example: Setting a Line Key as BLF List Key
The following example shows the configuration for a BLF List key.
Scenario Conditions Related Topic
phone_setting.auto_blf_list_enable = 0 BLF List Configuration
Example
linekey.1.type = 39
linekey.1.line =1
After provisioning, a BLF List key displays on line key 1. You can easily use this key to monitor a remote line. The
monitored line depends on a pre-configured SIP server.
Example: Setting a Line Key as Private Hold Key
The following example shows the configuration for a Private Hold key.
Example
linekey.1.type = 20
linekey.1.label =Private Hold
After provisioning, you can press the line key 1 to hold calls without notifying other phones registered with the
shared line, the shared line displays active to others shared line. It is only applicable to Shared Line Appearance.
Example: Setting a Line Key as Multicast Paging Key
The following example shows the configuration for a Multicast Paging key.
Example
linekey.1.type = 24
linekey.1.value = 224.5.6.20:10008
linekey.1.label = Sales
linekey.1.extension = 2
After provisioning, you can press the line key 1 to send announcements quickly to the Sales group.
Programmable Keys
You can customize programmable keys on the phone to enable users to access frequently used functions, or, if
your phone does not have a particular hard key, you can create a soft key. For example, if the phone does not have
a Do Not Disturb hard key, you can create a Do Not Disturb soft key.
The programmable key takes effect only when the IP phone is idle.
Topics
Supported Programmable Keys
Programmable Keys Configuration
Supported Programmable Keys
The following tables list programmable keys for each phone model.

Table of Contents

Other manuals for Yealink SIP-T48U

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T48U and is the answer not in the manual?

Yealink SIP-T48U Specifications

General IconGeneral
Handset typeWired handset
Product typeIP Phone
Product colorGray
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Expansion module supportYes
Ethernet LAN (RJ-45) ports2
Display diagonal7 \
Display resolution800 x 480 pixels
Lines quantity- lines
Phonebook capacity1000 entries
Number of VoIP accounts16
Voice codecsAGC, AJB, AMR-WB, CNG, G.711, G.722, G.723.1, G.726, G.729ab, VAD, iLBC
Security algorithmsAES, HTTPS, SRTP, TLS
Ethernet LAN data rates10, 100, 1000 Mbit/s
Ethernet LAN interface typeGigabit Ethernet
Front camera-
AC adapter input voltage100 - 240 V
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)10 - 95 %
Keypad number of keys29
Number of handles included1 pc(s)
Harmonized System (HS) code85171800
Weight and Dimensions IconWeight and Dimensions
Width226 mm
Height185 mm

Related product manuals