EasyManuals Logo

Yealink SIP-T48U Administrator's Guide

Yealink SIP-T48U
572 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #176 background imageLoading...
Page #176 background image
Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
173
Default
0
Supported
Devices
All phones except CP920
Web UI
Features > General Information > Headset Prior
Parameter
features.headset.ctrl_call.enable <y0000000000xx>.cfg
Description
It enables or disables the user to initiate or end a call by pressing the HEADSET key.
Note: It works only if “features.headset_mode.enable is set to 1 (Enabled).
Permitted
Values
0-Disabled
1-Enabled
Default
0
Supported
Devices
All phones except CP920
Dual Headset
The dual headset allows you to use two headsets on one IP phone. To use this feature, you need to physically con-
nect two headsets to the headset and handset jacks respectively. Once the IP phone connects to a call, the headset
connected to the headset jack has the full-duplex capability, with the headset connected to the handset jack is only
used for listening.
Note: The dual headset is not applicable to the Bluetooth headset and USB headset. It is not applicable to CP920 phones.
Topic
Dual Headset Configuration
Dual Headset Configuration
The following table lists the parameter you can use to configure dual headset.
Parameter
features.headset_training <y0000000000xx>.cfg
Description
It enables or disables the dual headset feature.
Note: It works only if “features.headset_mode.enable is set to 1 (Enabled).
Permitted
Values
0-Disabled
1-Enabled, users can use two headsets on one phone. When the IP phone joins a call, the headset
connected to the headset jack has the full-duplex capability, with the headset connected to the hand-
set jack is only used for listening.
Default
0
Supported
Devices
All phones except CP920
Web UI
Features > General Information > Dual Headset
Acoustic Clarity Technology
To optimize the audio quality in your network, Yealink phones support the acoustic clarity technology: Acoustic
Echo Cancellation (AEC), Background Noise Suppression (BNS), Automatic Gain Control (AGC), Voice Activity
Detection (VAD), Comfort Noise Generation (CNG) and jitter buffer.
Topics

Table of Contents

Other manuals for Yealink SIP-T48U

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T48U and is the answer not in the manual?

Yealink SIP-T48U Specifications

General IconGeneral
Handset typeWired handset
Product typeIP Phone
Product colorGray
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Expansion module supportYes
Ethernet LAN (RJ-45) ports2
Display diagonal7 \
Display resolution800 x 480 pixels
Lines quantity- lines
Phonebook capacity1000 entries
Number of VoIP accounts16
Voice codecsAGC, AJB, AMR-WB, CNG, G.711, G.722, G.723.1, G.726, G.729ab, VAD, iLBC
Security algorithmsAES, HTTPS, SRTP, TLS
Ethernet LAN data rates10, 100, 1000 Mbit/s
Ethernet LAN interface typeGigabit Ethernet
Front camera-
AC adapter input voltage100 - 240 V
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)10 - 95 %
Keypad number of keys29
Number of handles included1 pc(s)
Harmonized System (HS) code85171800
Weight and Dimensions IconWeight and Dimensions
Width226 mm
Height185 mm

Related product manuals