EasyManuals Logo

Yealink SIP-T48U Administrator's Guide

Yealink SIP-T48U
572 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #151 background imageLoading...
Page #151 background image
Audio Features
148
Touch Tone
If you enable touch tone and tap the keys (except the off-hook key), the phone will produce a sound when it is not
on the dialing/pre-dialing screen and not in a call.
It is only applicable to CP920 phones.
Topic
Touch Tone Configuration
Touch Tone Configuration
The following table lists the parameter you can use to configure the touch tone.
Parameter
features.touch_tone <y0000000000xx>.cfg
Description
It enables or disables the touch tone.
Permitted
Values
0-Disabled
1-Enabled, when you tap the keys (except the Off-hook key), the phone will produce a sound when it
is not on the dialing/pre-dialing screen and not in a call.
Default
1
Supported
Devices
CP920
Web UI
Features > Audio > Touch Tone
Ring Tones
Ring tones are used to play for incoming calls. You can select a built-in ring tone or a custom ring tone for the
phone system or specific line registration. To set the custom ring tones, you need to upload the custom ring tones to
the IP phone in advance.
You can also specify a period of time after which the phone will stop ringing if the call is not answered.
Topics
Custom Ringtone Limit
Ringtone Configuration
Custom Ringtone Limit
The ring tone format must meet the following:
Phone Model Format Single File Size
T57W/T54W/T48U/T48S/T46U/T46S .wav <=8MB
T48G/T46G/T29G .wav
<=8MB (2.4MB of space should be
reserved for the phone)
T53W/T53/T43U/T42U/T42S/T41S/T42G/T41P/T40P/T40G
/T27G/T23P/T23G/T21(P) E2/T19(P) E2/CP920
.wav <=100KB
Note: The ring tone file must be in PCMU/PCMA audio format, mono channel, 8K sample rate, and 16-bit resolution.

Table of Contents

Other manuals for Yealink SIP-T48U

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T48U and is the answer not in the manual?

Yealink SIP-T48U Specifications

General IconGeneral
Handset typeWired handset
Product typeIP Phone
Product colorGray
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Expansion module supportYes
Ethernet LAN (RJ-45) ports2
Display diagonal7 \
Display resolution800 x 480 pixels
Lines quantity- lines
Phonebook capacity1000 entries
Number of VoIP accounts16
Voice codecsAGC, AJB, AMR-WB, CNG, G.711, G.722, G.723.1, G.726, G.729ab, VAD, iLBC
Security algorithmsAES, HTTPS, SRTP, TLS
Ethernet LAN data rates10, 100, 1000 Mbit/s
Ethernet LAN interface typeGigabit Ethernet
Front camera-
AC adapter input voltage100 - 240 V
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)10 - 95 %
Keypad number of keys29
Number of handles included1 pc(s)
Harmonized System (HS) code85171800
Weight and Dimensions IconWeight and Dimensions
Width226 mm
Height185 mm

Related product manuals