EasyManuals Logo

Yealink SIP-T48U Administrator's Guide

Yealink SIP-T48U
572 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #330 background imageLoading...
Page #330 background image
Directory
327
Directory > Google Contacts > Google Contact Server
Parameter
google_contact_server.display_mode <y0000000000xx>.cfg
Description
It configures the display mode of the Google contacts.
Note: It works only if "google_contact_server.enable" is set to 1 (Enabled).
Permitted
Values
0-All downloaded Google contacts will be displayed on the phone.
1-Only the Google contacts whose number fields are not empty will be displayed on the phone.
Default
1
Supported
Devices
All phones except T48G, T46G, T42G, T41P and T29G
Signing in to the Google Contact Server
After you allow the IP phone to connect to the Google Contact Server, you can sign in to the Google Contact Server
via the web user interface, so that the Google contacts will appear in the phone directory.
Procedure
1. On your web user interface, select Directory > Google Contacts.
2. In the Authentication field, click Sign In.
A pop-up window and a code are displayed.
3.
Enter the code generated on the web user interface into the pop-up window.
4.
Enter your email address and password.
5.
Allow contact test to access your Google account.
Lightweight Directory Access Protocol (LDAP)
LDAP is an application protocol for accessing and maintaining information services for the distributed directory over
an IP network. You can configure the phones to interface with a corporate directory server that supports LDAP ver-
sion 2 or 3. The following LDAP servers are supported:
l Microsoft Active Directory
l Sun ONE Directory Server
l Open LDAP Directory Server
l Microsoft Active Directory Application Mode (ADAM)
For more information on LDAP, refer to
LDAP Directory on Yealink IP Phones
.
Topics
LDAP Attributes
Securely Storing the LDAP Credentials
LDAP Configuration
LDAP Attributes
The following table lists the most common attributes used to configure the LDAP lookup on the phones.
Abbreviation Name Description
gn givenName First name
cn commonName LDAP attribute is made up from given name joined to surname.
sn surname Last name or family name

Table of Contents

Other manuals for Yealink SIP-T48U

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T48U and is the answer not in the manual?

Yealink SIP-T48U Specifications

General IconGeneral
Handset typeWired handset
Product typeIP Phone
Product colorGray
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Expansion module supportYes
Ethernet LAN (RJ-45) ports2
Display diagonal7 \
Display resolution800 x 480 pixels
Lines quantity- lines
Phonebook capacity1000 entries
Number of VoIP accounts16
Voice codecsAGC, AJB, AMR-WB, CNG, G.711, G.722, G.723.1, G.726, G.729ab, VAD, iLBC
Security algorithmsAES, HTTPS, SRTP, TLS
Ethernet LAN data rates10, 100, 1000 Mbit/s
Ethernet LAN interface typeGigabit Ethernet
Front camera-
AC adapter input voltage100 - 240 V
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)10 - 95 %
Keypad number of keys29
Number of handles included1 pc(s)
Harmonized System (HS) code85171800
Weight and Dimensions IconWeight and Dimensions
Width226 mm
Height185 mm

Related product manuals