EasyManuals Logo

Yealink SIP-T48U Administrator's Guide

Yealink SIP-T48U
572 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #177 background imageLoading...
Page #177 background image
Audio Features
174
Acoustic Echo Cancellation (AEC)
Noise Suppression
Background Noise Suppression (BNS)
Automatic Gain Control (AGC)
Voice Activity Detection (VAD)
Comfort Noise Generation (CNG)
Jitter Buffer
Smart Noise Block
Acoustic Shield
Smart Noise Filtering
Acoustic Echo Cancellation (AEC)
Yealink phones employ advanced AEC for hands-free operation. You can configure the AEC feature to remove the
echo of the local loudspeaker from the local microphone without removing the near-end speech.
AEC is not normally required for calls via the handset. In some cases, where echo is experienced by the remote
party, AEC may be used to reduce/avoid echo when you use the handset.
Note: Utilizing acoustic echo cancellation will introduce a small increase of delay into an audio path which might cause a
lower voice quality.
Topic
AEC Configuration
AEC Configuration
The following table lists the parameter you can use to configure AEC.
Parameter
voice.echo_cancellation <y0000000000xx>.cfg
Description
It enables or disables the AEC (Acoustic Echo Canceller) feature.
Permitted
Values
0-Disabled
1-Enabled
Default
1
Web UI
Settings > Voice > Echo Cancellation > ECHO
Noise Suppression
The impact noise in the room is picked-up, including paper rustling, coffee mugs, coughing, typing, and silverware
striking plates. These noises, when transmitted to remote participants, can be very distracting.
You can enable the Noise Suppression feature to suppress these noises.
It is only applicable to CP920 phones.
Topic
Noise Suppression Configuration
Noise Suppression Configuration
The following table lists the parameter you can use to configure noise suppression.
Parameter
voice.tns.enable <y0000000000xx>.cfg
Description
It enables or disables the Noise Suppression feature.
Permitted
Values
0-Disabled
1-Enabled

Table of Contents

Other manuals for Yealink SIP-T48U

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T48U and is the answer not in the manual?

Yealink SIP-T48U Specifications

General IconGeneral
Handset typeWired handset
Product typeIP Phone
Product colorGray
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Expansion module supportYes
Ethernet LAN (RJ-45) ports2
Display diagonal7 \
Display resolution800 x 480 pixels
Lines quantity- lines
Phonebook capacity1000 entries
Number of VoIP accounts16
Voice codecsAGC, AJB, AMR-WB, CNG, G.711, G.722, G.723.1, G.726, G.729ab, VAD, iLBC
Security algorithmsAES, HTTPS, SRTP, TLS
Ethernet LAN data rates10, 100, 1000 Mbit/s
Ethernet LAN interface typeGigabit Ethernet
Front camera-
AC adapter input voltage100 - 240 V
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)10 - 95 %
Keypad number of keys29
Number of handles included1 pc(s)
Harmonized System (HS) code85171800
Weight and Dimensions IconWeight and Dimensions
Width226 mm
Height185 mm

Related product manuals