EasyManuals Logo

Yealink SIP-T48U Administrator's Guide

Yealink SIP-T48U
572 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #293 background imageLoading...
Page #293 background image
Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
290
Supported
Devices
T57W, T54W, T48U, T48S, T46U, T46S
Parameter
phone_setting.icon.delete
[1]
<y0000000000xx>.cfg
Description
It deletes all custom icons.
Permitted
Values
http://localhost/all
Default
Blank
Supported
Devices
T57W, T54W, T48U, T48S, T46U, T46S
[1]
If you change this parameter, the phone will reboot to make the change take effect.
Warnings Display
When one of the following situations occurs:
l The default password is being used
l Account registration failed
l Provisioning credentials are wrong
l Network is unavailable
l Line on redundancy registration
On the T42S/T42U/T41S phones, a warning message appears on the idle screen.
On the other phones, a warning icon appears in the status bar.
Topic
Warnings Display Configuration
Warnings Display Configuration
The following table lists the parameter you can use to configure the warnings display.
Parameter
phone_setting.warnings_display.mode <y0000000000xx>.cfg
Description
It enables or disables the phone to display warnings.
Permitted
Values
0-Disabled
1-Enabled
Default
1
Supported
Devices
All phones except T48G, T46G, T42G, T41P and T29G
Out of Service
When the network of the phone is disconnected and the warning message appears on the screen, the phone will
play an alert tone.
Topic
Out of Service Configuration
Out of Service Configuration
The following table lists the parameter you can use to configure out of service.

Table of Contents

Other manuals for Yealink SIP-T48U

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T48U and is the answer not in the manual?

Yealink SIP-T48U Specifications

General IconGeneral
Handset typeWired handset
Product typeIP Phone
Product colorGray
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Expansion module supportYes
Ethernet LAN (RJ-45) ports2
Display diagonal7 \
Display resolution800 x 480 pixels
Lines quantity- lines
Phonebook capacity1000 entries
Number of VoIP accounts16
Voice codecsAGC, AJB, AMR-WB, CNG, G.711, G.722, G.723.1, G.726, G.729ab, VAD, iLBC
Security algorithmsAES, HTTPS, SRTP, TLS
Ethernet LAN data rates10, 100, 1000 Mbit/s
Ethernet LAN interface typeGigabit Ethernet
Front camera-
AC adapter input voltage100 - 240 V
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)10 - 95 %
Keypad number of keys29
Number of handles included1 pc(s)
Harmonized System (HS) code85171800
Weight and Dimensions IconWeight and Dimensions
Width226 mm
Height185 mm

Related product manuals