Yealink SIP-T48U Administrator's Guide

Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
248
Description
It enables or disables the power LED indicator to flash when the phone receives an incoming call.
Permitted
Values
0-Disabled (power LED indicator does not flash)
1-Enabled (power LED indicator fast flashes (0.3s) red)
For T19(P) E2 phones:
0-Disabled (power LED indicator does not flash)
1-Enabled (power LED indicator fast flashes (0.3s) yellow)
Default
1
Supported
Devices
All phones except CP920
Web UI
Features > Power LED > Ringing Power Light Flash
Parameter
phone_setting.mail_power_led_flash_enable <y0000000000xx>.cfg
Description
It enables or disables the power LED indicator to flash when the phone receives a voice mail or a text
message.
Note: It works only if “account.X.display_mwi.enable” is set to 1 (Enabled).
Permitted
Values
0-Disabled (power LED indicator does not flash)
1-Enabled (power LED indicator slowly flashes (1s) red)
2-Enabled (if there are unread voice mails or text messages, the power LED indicator slowly flashes
(1s) red) even when the phone is busy, but value set by "phone_setting.talk_and_dial_power_led_
enable" has a higher priority.)
For T19(P) E2 phones:
0-Disabled (power LED indicator does not flash)
1-Enabled (power LED indicator slowly flashes (1s) yellow)
2-Enabled (if there are unread voice mails or text messages, the power LED indicator slowly flashes
(1s) yellow even when the phone is busy, but value set by "phone_setting.talk_and_dial_power_led_
enable" has a higher priority.)
Default
1
Supported
Devices
All phones except CP920
Web UI
Features > Power LED > Voice/Text Mail Power Light Flash
Parameter
phone_setting.mute_power_led_flash_enable <y0000000000xx>.cfg
Description
It enables or disables the power LED indicator to flash when a call is muted.
Permitted
Values
0-Disabled (power LED indicator does not flash)
1-Enabled (power LED indicator fast flashes (0.3s) red)
For T19(P) E2 phones:
0-Disabled (power LED indicator does not flash)
1-Enabled (power LED indicator fast flashes (0.3s) yellow)
Default
0
Supported
Devices
All phones except CP920

Yealink SIP-T48U Specifications

General

Handset type	Wired handset
Product type	IP Phone
Product color	Gray
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Expansion module support	Yes
Ethernet LAN (RJ-45) ports	2
Display diagonal	7 \
Display resolution	800 x 480 pixels
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	16
Voice codecs	AGC, AJB, AMR-WB, CNG, G.711, G.722, G.723.1, G.726, G.729ab, VAD, iLBC
Security algorithms	AES, HTTPS, SRTP, TLS
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet LAN interface type	Gigabit Ethernet
Front camera	-
AC adapter input voltage	100 - 240 V
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 95 %
Keypad number of keys	29
Number of handles included	1 pc(s)
Harmonized System (HS) code	85171800

Weight and Dimensions

Width	226 mm
Height	185 mm