EasyManuals Logo

Yealink SIP-T48U Administrator's Guide

Yealink SIP-T48U
572 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #532 background imageLoading...
Page #532 background image
Configuration Parameters
529
Values 1-Enabled
Default
0
Parameter
sip.unreg_with_socket_close <y0000000000xx>.cfg
Description
It enables or disables the phone to close the socket immediately when the user deregisters the cor-
responding account(s).
Permitted
Values
0-Disabled
1-Enabled
Default
0
Parameter
account.X.check_cseq.enable
[1]
<MAC>.cfg
Description
It enables or disables the phone to check if the CSeq sequence number in the request is lower than
that in the previous request on the same dialog.
Permitted
Values
0-Disabled
1-Enabled. If the CSeq sequence number in the request is lower than that in the previous request, the
phone will reject the request.
Default
1
Parameter
account.X.check_to_tag.enable
[1]
<MAC>.cfg
Description
It enables or disables the phone to check if the To-tag is carried in the To header in renewal request.
Permitted
Values
0-Disabled
1-Enabled. If the To-tag does not exist, the phone will reject the request.
Default
0
Parameter
features.call_invite_format <y0000000000xx>.cfg
Description
It configures the format of callee field in the INVITE message.
Permitted
Values
0-sip:XXX
1-tel:Number, you need to set “account.X.outbound_proxy_enable" to 1.
Default
0
Parameter
sip.escape_characters.enable <y0000000000xx>.cfg
Description
It enables or disables the phone to convert ASCII code into corresponding symbol.
Permitted
Values
0-Disabled
1-Enabled
Default
1
Case Scen-
ario
Target characters: %5F (escape character % plus the ASCII characters 5F)
1. If you want to convert the ASCII code, set the following:
sip.escape_characters.enable = 1
sip.reserve_characters = %NULL%
Result: The target characters %5F are converted to _.
2. If you do not want to convert the ASCII code, set the following:
sip.escape_characters.enable = 0
sip.reserve_characters = %

Table of Contents

Other manuals for Yealink SIP-T48U

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T48U and is the answer not in the manual?

Yealink SIP-T48U Specifications

General IconGeneral
Handset typeWired handset
Product typeIP Phone
Product colorGray
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Expansion module supportYes
Ethernet LAN (RJ-45) ports2
Display diagonal7 \
Display resolution800 x 480 pixels
Lines quantity- lines
Phonebook capacity1000 entries
Number of VoIP accounts16
Voice codecsAGC, AJB, AMR-WB, CNG, G.711, G.722, G.723.1, G.726, G.729ab, VAD, iLBC
Security algorithmsAES, HTTPS, SRTP, TLS
Ethernet LAN data rates10, 100, 1000 Mbit/s
Ethernet LAN interface typeGigabit Ethernet
Front camera-
AC adapter input voltage100 - 240 V
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)10 - 95 %
Keypad number of keys29
Number of handles included1 pc(s)
Harmonized System (HS) code85171800
Weight and Dimensions IconWeight and Dimensions
Width226 mm
Height185 mm

Related product manuals