Yealink VC120 - Page 148

Administrator’s Guide for Yealink Video Conferencing Systems
132
Parameter
Description
Configuration Method
Gatekeeper IP
Address
2/Gatekeeper
Server 2
Configures the IP address of the
secondary gatekeeper.
Remote Control
Web User Interface
Gatekeeper Port
2/Port
Configures the port of the primary
gatekeeper.
Valid values: Integer from 0 to
65535.
Default: 1719
Remote Control
Web User Interface
Gatekeeper
Authentication
Enables or disables support for
gatekeeper authentication.
Default: Disabled
Note: When Gatekeeper
Authentication is enabled, the
gatekeeper ensures that only trusted
H.323 systems are allowed to access
the gatekeeper.
Remote Control
Web User Interface
Gatekeeper
Username
Specifies the user name for
authentication with gatekeeper.
Default: blank
Remote Control
Web User Interface
Gatekeeper
Password
Specifies the password for
authentication with gatekeeper.
Default: blank
Remote Control
Web User Interface
H.460 Active
Enables or disables firewall traversal
of H.323 calls using H.460 protocols.
Default: Disabled
For more information, refer to
Enabling H.460 Support for H.323
Calls on page 135.
Remote Control
Web User Interface
H.323 Tunneling
(Optional) Instructs the system to
send all signaling and media through
the HTTP tunnel.
Default: Disabled
For more information, refer to H.323
Tunneling on page 73.
Remote Control
Web User Interface
H.235
Specifies the H.235 type during an
H.323 call.
Web User Interface