FXS Gateway TA400/800 User Manual
Figure 4-9 VoIP Server Settings
General
Table 4-3 Description of VoIP Server General Settings
The ID for the VoIP server template.
The name for the VoIP server template.
Choose the type of the VoIP server, SIP or IAX.
Enabel
Register
Do not check "Enable Register", if you want to register the FXS
port as a Service Provider SIP (IAX) trunk to the VoIP Server.
One Service Provider SIP (IAX) trunk to TA FXS Gateway also
should be created on the VoIP Server.
Check "Enable Register" if you want to register the FXS port as
an extension of the VoIP server. You will need to enter the
relevant user name, password, etc in the FXS port page when
using this template.
Transport
This will be the transport method used by the SIP Trunk. This
method is given by the SIP trunk provider. The options are UDP
Hostname/IP
VoIP server hostname or IP address. 5060 is the standard port
number used by SIP protocol. Don’t change this part if it is not
VoIP server hostname. An IP address also can be filled here.
Outbound
Proxy Server
A proxy that receives requests from a client. Even though it may
not be the server resolved by the Request-URI.
38/59
To Next Page
Loading...
Need help?
General
