Yeastar Technology TA800 - Page 45

FXS Gateway TA400/800 User Manual
status from the VoIP server.
6) T.38
Settings on this page is for the purpose of improving receiving and sending T.38 FAX.
Figure 4-17 T.38 Settings
Table 4-8 Description of T.38 Settings
Items
Description
Re-invite SDP Not Add T.38
Attributes
If set to Yes, SDP in re-invite packet will not add
T.38 attributes.
Error Correction
Re-invite SDP T38FaxUdpEc.
T.38 Max Bit Rate
Set T38 Max Bit Rate.
7) Advanced Settings
Figure 4-18 SIP Advanced Settings
Table 4-9 Description of SIP Advanced Settings
Items
Description
From Field
Where to get the caller ID in SIP packet.
To Field
Where to get the DID in SIP packet.
180 Ringing
It is set when the telecom provider needs. Usually
it is not needed.
Remote Party ID
Whether to send Remote-Party-ID on SIP header
or not. Default: no.
Allow Guest
Whether to allow anonymous registration
extension or not. Default: no. It’s recommended
45/59