Yeastar Technology TA810 - Page 29

TA410/810 User Manual
29/63
Figure 5-3 Simple Mode Route
Table 5-3 Description of Simple Mode Route
Items
Description
Route Name
Define the route name.
Call Source
Choose the trunk or trunk group for the incoming calls.
Call Destination
Choose the trunk or trunk group to route the incoming calls to.
Hotline
Dial the number directly, The dial pattern is ignored.
2) Detail Mode
Choose “No” for Simple Mode, you will see the detailed configuration page as the
following picture shows. Detailed settings for Match Incoming Calls and Handle
Matched Incoming Calls are provided in Detailed Mode.