Yeastar Technology TA810 - IAX Settings; IAX General Settings; IAX Codecs

TA410/810 User Manual
25/63
IAX Settings
IAX is the Internal Asterisk Exchange protocol, you can connect to TA FXO Gateway
or register IAX trunk to another IAX server. It’s supported by the asterisk-based
IPPBX.
Figure 4-12 IAX Settings
Table 4-7 Description of IAX Settings
Items
Description
UDP Port
Port used for IAX2 registrations. Default is 4569.
Bandwidth
Low/medium/high with this option you can control which
codec to be used.
Minimum Registration
Time/Subscription Time
Minimum duration (in seconds) of an IAX2 registration.
Default is 60 seconds
Maximum Registration
Time/Subscription Time
Maximum duration (in seconds) of an IAX2 registration.
Default is 1200 seconds.
Codecs
Enable the codec you want for IAX communication.