Yeastar Technology TA810 User Manual

TA410/810 User Manual
24/63
Figure 4-11 SIP Advanced Settings
Table 4-6 Description of SIP Advanced Settings
Items
Description
Call ID Field
Where to get the caller ID in SIP packet.
DID Field
Where to get the DID in SIP packet.
180 Ringing
It is set when the telecom provider needs. Usually
it is not needed.
Remote Party ID
Whether to send Remote-Party-ID on SIP header
or not. Default: no.
Allow Guest
Whether to allow anonymous registration
extension or not. Default: no. It’s recommended
that it is disabled for security reason.
Pedantic
Enable pedantic parameter. Default: no.
Alwaysauthreject
If enabled, when TA FXO Gateway rejects
“Register” or “Invite” packets, TA FXO Gateway
always respond the packets using “SIP404 NOT
FOUND”. It’s recommended that it is enabled for
security reason.
OPTIONS Response 200
If set to yes, the response to an OPTIONS is
always 200OK.
Session-timers
Enable session-timer mode, default: yes. If you find
the call is cut off every 15 minutes every time,
please disable this.
Session-expires
The max refresh interval
Session-minse
The min refresh interval, which mustn't be shorter
than 90s.
Session-refresher
Choose the session-refresher, the default is Uas.

Yeastar Technology TA810 Specifications

General

Brand	Yeastar Technology
Model	TA810
Category	Gateway
Language	English