EasyManua.ls Logo

Yeastar Technology TA810 - SIP QoS Settings; SIP Response Code

Yeastar Technology TA810
63 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
TA410/810 User Manual
23/63
Figure 4-8 Codecs
If you want to use codec G729, we recommend buying a license key and input it here.
4) Qos
QoS (Quality of Service) is a major issue in VoIP implementations. The issue is how
to guarantee that packet traffic for a voice or other media connection will not be
delayed or dropped due interference from other lower priority traffic. When the
network capacity is insufficient, QoS could provide priority to users by setting the
value.
Figure 4-9 Qos
Note: Its recommended that you configure the QoS in your router or switch instead of
TA FXO Gateway side.
5) Response Code
You can change the response code on TA FXO Gateway to the one you want before
sending it to the VoIP server. It helps the VoIP server understands better the exact call
status, like busy, no response and others.
Figure 4-10 Response Code
Note: we don’t’ recommend configuing this if you are not familiar with the code of call
status from the VoIP server.
6) Advanced Settings

Related product manuals