TA410/810 User Manual
55/63
Figure 11-7 Server Address
AES Key
If the configuration file is encrypted by AES key, you need to fill the key in this
field.
Always Apply
With No, it will compare the current configuration file with the last updated one, if
the contents are the same no update will be applied. With Yes, it will always apply
the updated configuration file.
Firmware Update
TA410/810 can be upgraded to a new firmware version via network or locally. Users
could upgrade firmware via HTTP or TFTP. Please go to System→ System
Preferences→ Firmware Update to do upgrade.
Notes:
1. If “Reset configuration to Factory Defaults” is enabled, the system will be restored
to factory default settings.
2. When updating the firmware, please don’t turn off the power. Or the system will
be damaged.
3. If you are trying to upgrade through HTTP, please make sure that your TA410/810
is able to visit external network, or it cannot access Yeastar website to get the
firmware file, causing the upgrade fail.
Upgrade through HTTP
On the Firmware Upgrade page, choose HTTP URL.
Step1. Enter the download link of the firmware file.
Note: the HTTP URL should be a BIN file download link.
Step2. Click “Start” to upgrade.
To Next Page
Loading...
Need help?
General
