TA410/810 User Manual
46/63
The recipients for the alert notification, and multiple email
addresses are allowed, please separate them by “;”.
E.g. jerry@yeastar.com;jason@yeastar.com,456@sina.com
The subject of the alert email.
Text content supports predefined variables. Variable names
and corresponding instructions are as follows:
gateway hostname:$(HOSTNAME)
attack source ip address:$(SOURCEIP)
attack dest mac:$(DESTMAC)
attack source port:$(DESTPORT)
attack source protocol:$(PROTOCOL)
attack occurred:$(DATETIME)
AMI Settings
The Asterisk Manager Interface (AMI) is a system monitoring and management
interface provided by Asterisk. It allows live monitoring of events that occur in the
system, as well enabling you to request that Asterisk perform some action. The
actions that are available are wide-ranging and include things such as returning status
information and originating new calls. Many interesting applications have been
developed on top of Asterisk that take advantage of the AMI as their primary interface
to Asterisk.
There are two main types of messages on the Asterisk Manager Interface: manager
events and manager actions.
The 3
rd
party software can work with TA410/810 using AMI interface. It is disabled by
default. If necessary, you can enable it.
Figure 10-5 AMI Settings
User Name, Password & Port
After enabling AMI, you can use this username and password to log in TA410/810.
The default port is 5038.
To Next Page
Loading...
Need help?
General
