YOKOGAWA 436101 Operation Guide

25IM 04P02B01-02E
Menu Structure of Setting Mode
References to the µ R20000 Recorder User’s Manual (IM 04P02B01-01E) are given in
parentheses.
Clock
Aux
Zone
Partial
Chart
Unit
Alarm
Bias
Range CH
CH Bias Bias
CH Level
CH
CH Left Right
CH Partial Expand
Boundary
mm/h
(Date/Time)
Unit
Mode
TypeAlarm
Relay numberRelay
Value
Range Span_left Span_right
Range Span_left Span_right
Range Span_left Span_right
Range Span_left Span_right
Range Span_left Span_right
Ref.CH Span_left Span_right
Span_left Span_right
Scale_right Low-cut
Scale_left
Type Range Span_left
Span_right Scale_left
Scale_right
Scale_left Scale_right
Low-cut Low-cut point
Vol t
TC
RTD
Scale
Delta
SQRT
1-5V
DI
Skip
Trend
Print out
Tag
Message
Chart 2
Moving_AVE
Filter
Alarm delay time
Brightness
Formula
Unit
Constant
Alarm
TLOG
Aux
Math
CH Trend
Message number (Message)
CH
CH
CH
CH
CH
CH
Mode
Unit
formula
Span left Span right
K##Nomber
CH
CH
CH Left Right
CH
CH Trend
CH
CH
Periodic
Tag
Duration
Level
Timer number
Alarm
SUM scale
Type
Value Relay
Relay number
Zone
Partial Partial
E
xpand
Boundary
Print out
Tag
Alarm delay time
Display
Number of samples
Response Time
Duration
Light
DST
DST Start month Start day Start time End month End day End time
mm/h
Tag
Periodic
are not displayed in the default condition.
To display these items, settings must be changed in
Basic Setting mode.
(section 5.1)
(section 6.12)
(section 6.13)
(section 5.2)
(section 5.3)
(section 5.4)
(section 5.5)
(section 6.1)
(section 6.4)
(section 6.5)
(section 6.6)
(section 6.7)
(section 6.8)
(section 6.9)
(section 6.3)
(section 6.2)
(section 6.10)
(section 6.11)
(section 6.16)
(section 9.2)
(section 9.3)
(section 9.4)
(section 9.5)
(section 9.6)
(section 9.7)
(section 9.8)
(section 9.9)
(section 9.10)
(section 9.11)
Key operation
Hold down the MENU key for 3 seconds
in Operation mode to enter Setting mode.
Hold down the MENU key for 3 seconds
in Setting mode to return to Operation mode.
Hold down both the and keys
for 3 seconds in Setting mode to enter
Basic Setting mode.
:
:
Use the
Use the
key.
key.
Calibration Calibration 1 datums 1 revise 2 datums 2 revise Decision
CH
Batch No.
MSG format
Lot No.
Detail Start
Message No.
Comment
(Comment)Line No.
(Comment)Line No.
Same as Start.
Start2
Same as End.
End2
Print Batch Name Chart Speed Clock
Date/Time
Action Feed
End Comment
Print Batch Name Chart Speed Clock
Date/Time
Action
(Message format)
Feed
Batch
Auto inc. POC output POC speed
(section 6.14)
(section 6.14)
(section 6.14)
(section 6.15)
Firmware version: 1.31
Common Operations and Menu Structure

YOKOGAWA 436101 Specifications

General

Brand	YOKOGAWA
Model	436101
Category	Measuring Instruments
Language	English