33IM 04P02B01-02E
Checking or Setting the Date/Time
Checking the Date/Time
The date/time is shown on the display when the
DISP
key is pressed several times.
Setting the Date/Time
1.
Hold down the
MENU
key for 3 seconds to enter Setting mode.
2.
Press the key to show Clock and then press the key.
Set=Clock
3.
Set the date and time and press the key.
04/01/17 10:39:47
Year/Month/Day Hour:Minute:Second
Example: Changing from January to May in the figure below
Press the key three times to move the cursor to the month position. Next,
press the
key four times to change the value from 1 to 5.
04/01/17 10:39:47 04/05/17 10:39:47
After changeBefore change
4.
When the Setting complete screen appears, press the
ESC/?
key.
Clock
Setting complete
5.
Hold down the
MENU
key for 3 seconds to return to Operation mode.
Explanation
The date format can be changed by date format type of basic setting mode.
* When the key or key is pressed while holding down the SHIFT key, the operation is
reversed as when the respective key is pressed by itself.
Preparing to Record
To Next Page
Loading...
Need help?
General
