Switching Command Modes
To use AQ6317-compatible commands, you must place the instrument in AQ6317
command mode.
Procedure
1.
Press SYSTEM. The system setting menu is displayed.
2.
Press the MORE1/4 soft key. The communication interface setting menu is
displayed.
3.
Press the REMOTE INTERFACE soft key. The setting menu for the interface to
be used is displayed.
4.
Press the GP-IB soft key to specify GP-IB as the communication interface.
5.
Press the COMMAND FORMAT soft key. The command format setting menu is
displayed.
6.
Press the AQ6317 soft key.
To Next Page
Loading...
