YOKOGAWA AQ6370C User Manual

7-14
IM AQ6370C-17EN
Note
For the AQ6375/AQ6375B, all soft keys included in ANALYSIS2 are disabled when the
horizontal axis is wavenumber.
Analysis functions included in ANALYSIS2 cannot be executed. Also, these parameters cannot be set.
MEMORY
Function Control Command
SAVE
ATRACE→MEMORY
:MEMory:STORe<wsp><integer>,TRA
BTRACE→MEMORY
:MEMory:STORe<wsp><integer>,TRB
CTRACE→MEMORY
:MEMory:STORe<wsp><integer>,TRC
DTRACE→MEMORY
:MEMory:STORe<wsp><integer>,TRD
ETRACE→MEMORY
:MEMory:STORe<wsp><integer>,TRE
FTRACE→MEMORY
:MEMory:STORe<wsp><integer>,TRF
GTRACE→MEMORY
:MEMory:STORe<wsp><integer>,TRG
REC ALL
MEMORY→ATRACE
:MEMory:LOAD<wsp><integer>,TRA
MEMORY→BTRACE
:MEMory:LOAD<wsp><integer>,TRB
MEMORY→CTRACE
:MEMory:LOAD<wsp><integer>,TRC
MEMORY→DTRACE
:MEMory:LOAD<wsp><integer>,TRD
MEMORY→ETRACE
:MEMory:LOAD<wsp><integer>,TRE
MEMORY→FTRACE
:MEMory:LOAD<wsp><integer>,TRF
MEMORY→GTRACE
:MEMory:LOAD<wsp><integer>,TRG
MEMORY CLEAR
:MEMory:CLEar<wsp><integer>
FILE
Function Control Command Remarks
WRITE
DRIVE INT/EXT
:MMEMory:CDRive<wsp>INTernal|EXTernal
FILE NAME
:MMEMory:CDIRectory<wsp><directory name>
(TRACE)
:MMEMory:STORe:TRACe<wsp><trace name>,
BIN|CSV,<"file name">[,INTernal|EXTernal]
(ALL TRACE)
:MMEMory:STORe:ATRace<wsp> <”file name”>
[,INTernal|EXTernal]
(MEMORY)
:MMEMory:STORe:MEMory<wsp><integer>,BIN
|CSV, <"file name">[,INTernal|EXTernal]
(GRAPHICS)
:MMEMory:STORe:GRAPhics<wsp>B&W|COLor,
BMP|TIFF,<"file name">[,INTernal|EXTernal]
(SETTING)
:MMEMory:STORe:SETTing<wsp><"file name">
[,INTernal|EXTernal]
(DATA)
:MMEMory:STORe:DATA<wsp><"file name">
[,INTernal|EXTernal]
OUTPUT ITEM SETTING
DATE&TIME ON/OFF
:MMEMory:STORe:DATA:TEM<wsp>DATE,
OFF|ON|0|1
LABEL ON/OFF
:MMEMory:STORe:DATA:ITEM<wsp>LABel,OFF
|ON|0|1
DATA AREA ON/OFF
:MMEMory:STORe:DATA:TEM<wsp>DATA,
OFF|ON|0|1
CONDITION ON/OFF
:MMEMory:STORe:DATA:ITEM<wsp>CONDition
,OFF|ON|0|1
TRACE DATA ON/
OFF
:MMEMory:STORe:DATA:ITEM<wsp>TRACe,OFF
|ON|0|1
FILE TYPE CSV/DT6
:MMEmory:STORe:DATA:TYPE<wsp>CSV|
DT|0|1
WRITE MODE ADD/
OVER
:MMEMory:STORe:DATA:MODE<wsp>
ADD|OVER|0|1
(PROGRAM)
:MMEMory:STORe:PROGram<wsp><integer>,
<"file name">[,INTernal|EXTernal]
7.2 Table of Correspondence between Soft Keys and Remote Commands

YOKOGAWA AQ6370C Specifications

General

Brand	YOKOGAWA
Model	AQ6370C
Category	Measuring Instruments
Language	English