YOKOGAWA AXFA14G User Manual

<2. Handling Precautions>
5
IM 01E20A01-01EN
2. Handling Precautions
This instrument has been inspected carefully at the factory
before shipment. When the instrument is delivered, visually
check that no damage has occurred during transportation.
Alsocheckthatallowmetersmountinghardwareshown
below is included.
Integral Flowmeter and Remote Flowtube
Applicable model Part name Qty
AXFG
AXFC
AXFH
AXFW
Hexagonal wrench
2 pieces
(one each of 1.5 mm and
3 mm nominal sizes)
Note:Incaseofselectingtheprocessconnectioncode“-AA1”,
“-AA2”,“-AD1”,“-AD2”,“-AD4”,“-AJ1”,“-AJ2”,“-AG1”or
“-AP1”,asetofcenteringdevicesisalsoattached.
Remote Converter
Applicable model Part name Qty
AXFA11G Mounting hardware 1 set
AXFA14G
AXFA14C
Mounting hardware 1 set
Hexagonal wrench
1 piece
(nominal size 3 mm)
2.1 Checking Model and
Specications
Themodelcodeandspecicationsarefoundonthename
plate located on the outside of the case. When checking the
modelcodeandspecicationsmatchwhatyouhaveordered,
refer to user’s manual as listed in Table 1.1.
Be sure you have your model number and serial number
available when contacting Yokogawa.
F0201.ai
Figure 2.1.1 Name Plate (AXF Integral Flowmeter)
F0202.ai
Figure 2.1.2 Name Plate (AXF Remote Flowtube)
F0203.ai
Figure 2.1.3 Name Plate (AXFA14 Remote Converter)
F0204.ai
Figure 2.1.4 Name Plate (AXFA11 Remote Converter)
2.2 Storage Precautions
If the instrument is to be stored for a long period of time
after delivery, observe the following points.
 The instrument should be stored in its original packing
condition in the storage location.
 Selectastoragelocationthatfullsthefollowing
conditions:
• A place where it will not be exposed to rain or water
• A place subject to minimal vibrations or shocks
• Temperature and humidity levels should be as
follows:
Temperature: -30 to 70°C
Humidity: 5 to 80% RH (no condensation)
The preferred ambient temperature and humidity
levels are 25°C and approximately 65% RH.
 If the instrument is transferred to the installation site
and stored without being installed, its performance
maybeimpairedduetotheinltrationofrainwater
and so forth. Be sure to install and wire the instrument
as soon as possible after transferring it to the
installation location.
Handling Precautions
2

YOKOGAWA AXFA14G Specifications

General

Brand	YOKOGAWA
Model	AXFA14G
Category	Measuring Instruments
Language	English