YOKOGAWA BT200 User Manual

<Toc> <Ind> <5. USING THE BT200 FUNCTIONS >
5-9
IM 01C00A11-01E
(1) ID (Identification Code) SETUP
Each BT200 BRAIN TERMINAL is assigned an ID
(identification code) to identify itself from other
terminals. The ID is displayed on the startup panel
and the security code setup panel. You can change
the ID from the utility panel. The ID is up to eight
characters long.
ID
ID:BT200
set new ID
_
CODE CAPS CLR ESC
F0511.EPS
1.Select ‘1.ID’ from the utility
panel to call panel .
Type the new ID and press
[ENT] twice.
1
䊊
1
䊊
(2) LANGUAGE SELECTION (BETWEEN
ENGLISH AND JAPANESE)
a) English to Japanese
LANGUAGE
1.ENGLISH
2.JAPANESE
ESC
F0512.EPS

1.Select ‘3. LANGUAGE
SELECT’ from the utility panel
to select the panel .
 If you Select ‘2. JAPANESE’
and press [ENT], the
message mode is switched to
Japanese.
[F3] NO
[F4] OK
➝Return to panel .

➝Go to panel .
1
䊊
2
䊊
3
䊊
LANGUAGE
1.ENGLISH
2.JAPANESE


change JAPANESE
NOOK
1
䊊
[F4] ESC
➝Start
 communication,
returning to the
initial data panel.
1
䊊
3
䊊

YOKOGAWA BT200 Specifications

General

Brand	YOKOGAWA
Model	BT200
Category	Measuring Instruments
Language	English