YOKOGAWA BT200 User Manual

<Toc> <Ind> <5. USING THE BT200 FUNCTIONS >
5-1
IM 01C00A11-01E
5. USING THE BT200
FUNCTIONS
5.1 SETTING UP DATA IN A
BATCH
(UPLOAD/DOWNLOAD)
Where a number of instruments are used, many units
might have virtually identical settings. In this situation,
the setup procedure can be simplified by copying the
settings for one instrument into another in a batch, then
making necessary modifications to that data. This setup
technique helps standardize the operating state of each
individual instrument and reduces the chances of
improper settings.
This function does not apply to certain instruments,
such as signal conditioner cards.
(1) COPY TO THE BT200 IN A BATCH
(UPLOAD)
First, it is necessary to copy the settings for a particular
instrument into the BT200 in a batch. The items from
the SET menu can be copied.
MENU
A:DISPLAY
B:SENSOR TYPE
HOME SET ADJ ESC
F0501-1.EPS
FUNC
1.MENU
2.UP LOAD TO HHT
3.DOWN LOAD TO INST
4.PRINT ALL DATA
HOME SET ADJ 
1.Connect the BT200 to the
instrument and make it ready
for communication.
 Press [F4] ESC on the menu
panel to call panel .
2.Select ‘2. UPLOAD TO HHT’
and press [ENT]

 HHT(Handheld terminal):
BT200
2
䊊
1
䊊
2
䊊

YOKOGAWA BT200 Specifications

General

Brand	YOKOGAWA
Model	BT200
Category	Measuring Instruments
Language	English