4-6
<Toc> <Ind> <4. BT200 BASIC OPERATIONS >
IM 01C00A11-01E
4.4 BASIC OPERATIONS
This section illustrates the basic operations of
the BT200-P00 (BRAIN TERMINAL with a
printer) with reference to online communica-
tion with DPharp, for example.
For the BT200-N00, the function commands
marked by a corrugated line ( ) and the
messages marked by an asterisk (*) are not
displayed.
(1) TURN THE POWER SWITCH ON OR
OFF
■ Startup panel
Turn on the BT200, and it comes up with the
panel shown below. (The message “Please wait
. . . ” will be displayed for seconds after the
unit is turned on.)
To Next Page
Loading...
