-15-
1） Incident light path window
Do not put your fingers into this window when turn on the power supply and
filter wheel is under operation. You could injure your fingers.
2） Outgoing light path window
Do not put your fingers into this window when turn on the power supply and
filter wheel is under operation. You could injure your fingers.
3） Connector for MOTOR cable
Connect with the supplied MOTOR connecting cable. Please connect MOTOR1
connecting cable to the 1st filter wheel, and MOTOR2 connecting cable to the
2nd filter wheel.
4） Filter wheel cover
Please open when exchanging filters. Make sure to put off power when you
exchange filters.
5） Filter cover fixing screw
Four screws to fix the cover.
6） Filter ports
7） Filter fixing ring
Can be tightly screwed by using supplied screwing tool (20).
(6)
(7)
(8)
(10)
(11)
(l)
(13)
(14)
(15)
(16)
(20)
To Next Page
Loading...