1-6
IM 701610-61E
Setting the Trigger Coupling
28. Turn the jog shuttle to move the cursor to the desired channel for setting the
coupling.
29. Press SELECT to select DC or AC.
Setting the HF Rejection
30. Turn the jog shuttle to move the cursor to the desired channel for setting the HF
rejection (HF Rej).
31. Press SELECT to select ON, or OFF.
Press ESC to close the dialog box.
• Selecting the Combination Trigger
32. Press the Combination soft key and then press the I2C Only, I2C on Pattern,
or I2C
→→
→→
→ Pattern soft key.
• When I2C Only Is Selected
33. Press the Set Pattern soft key. The Set Pattern dialog box appears. If you
selected I2C Only, you do not have to set this item.
Press ESC to close the box.
• When I2C on Pattern Is Selected
33. Press the Set Pattern soft key. The Set Pattern dialog box appears.
Setting the CH3 and CH4 Pattern
34. Turn the jog shuttle to move the cursor to Pattern CH3 or CH4.
35. Press SELECT to select H, L, or X.
Setting the Trigger Condition
36. Turn the jog shuttle to move the cursor to Condition.
37. Press SELECT to select True or False.
Press ESC to close the dialog box.
1.3 Setting the Trigger Conditions
To Next Page
Loading...
