YOKOGAWA MY600 - Page 14

11
IM MY600-01EN
Handling
• Usetheinstrumentaccordingtothemeasurement
method and conditions specified in this manual.
Otherwise, the protection function of this instrument
will not work properly, and this can lead to electric
shock and other serious accidents or damage the
instrument.
• Beforeusingtheinstrument,checkthattheDUT
operates correctly with a known power source.
• Whenconnectingtheprobe,donottouchthe
measurement switch.
• Whenusingtheprobes,inserttheconnectorsallthe
way to the root of the connectors into the LINE and
EARTH terminals.
• Donotswitchtherangeswitchwhenprobesare
connected to the DUT.
• Donotconnectprobeswhentheproductoryour
hands are wet. Doing so may cause electric shock.
• Whenmakingameasurement,donotshortthepower
supply line with the probe. Doing so may cause electric
shock.
Damaged Cable
If the probe is torn and the inner metal is exposed or if a
color different from the outer sheath appears, stop using
the cord immediately.