36
IM MY600-01EN
Checking the Battery Level
1.
Load batteries into the instrument according to chapter
13, “Battery Replacement.”
2.
Set the range switch to any position other than OFF,
and turn the power on.
3.
Check the battery level indicator displayed at the upper
left corner of the LCD.
: Normal.
: The battery level is low.
To continue measuring, replace the batteries
according to chapter 13, “Battery Replacement.”
: The battery level is below the minimum
operating voltage. Even if the instrument
operates in this condition, the accuracy is not
guaranteed. Replace the batteries quickly.
Even when the battery level indicator is
before
a measurement, it may change to
during the
measurement depending on the DUT, such as with a low-
resistance device.
We recommend AA alkaline batteries for the instrument.
The battery level indicator may not be accurate when other
types of batteries are used.
To Next Page
Loading...
