62
IM MY600-01EN
12. USB Communication
The internal memory data can be transferred to the PC by
using the 91030 USB communication adapter.
How to Transfer Data
1.
Install the USB driver in the PC in advance.
2.
Connect the 91030 USB communication adapter to the
USB port of the PC.
3.
Remove the probes from the instrument’s terminals.
Open the communication port cover, and insert the
91030 USB communication adapter.
4.
Turn the instrument on. The range can be set to any
position.
5.
Using communication commands, load the data into
the PC. For details, see the 91030 USB communication
adapter user’s manual.
91030
Label side
To Next Page
Loading...
