YOKOGAWA MY600 - 1 Features

21
IM MY600-01EN
1. Features
• Thisinstrumentiscompactandlightweightandeasyto
carry.
• ItisequippedwithanLCDbacklightandLEDspotlight
to facilitate working at dimly illuminated location or at
night. The built-in illuminance sensor automatically
turns on/ off the lights. An auto light-off function is also
available to turn off these lights automatically if there is
no user interaction for two minutes. These lights can also
be set to off at all times.
• Theinstrumenthasanautopower-offfunctionthat
automatically turns itself off if there is no user interaction
for 10 minutes. This function is not activated when a
continuous measurement is in progress.
• Atestprobewitharemoteswitchissuppliedasa
standard accessory.
• Ashoulderstrapcanbeusedfortwo-handoperation.
• Livecircuitwarningisindicatedwithablinking“
”
symbol and buzzer sound.
• Involtagemeasurement,livecircuitwarningisindicated
atavoltageinputof30Vorhigher.Inaddition,whether
the input voltage is AC or DC is automatically detected
and indicated.
• Anautodischargefunctionisprovided.Whenmeasuring
an insulation resistance, like a capacitive load, electric
charges stored in capacitive circuits are automatically
discharged after measurement. The discharge status is
indicated with a blinking “
” symbol and buzzer sound.
• Ininsulationresistancemeasurement,blinkingLCD
backlight indicates whether a measured value is less
than or higher than the reference value. This pass/fail
judgmentfunctioncanbeturnedoff.