YOKOGAWA MY600 - Page 13

10
IM MY600-01EN
DUT
• TurnofftheDUTwhenmeasuringtheinsulation
resistance.
• Whenusingtheinstrumentnearliveparts,becareful
not to touch parts that have voltage applied to them.
• Useinsulatedprotectivegears,suchasinsulated
gloves, for your safety.
Operating Environment
• Donotoperatetheinstrumentinthepresenceof
flammable gases or vapors.
• Donotusetheinstrumentifthereiscondensationon
it.
• Donotinstallorusetheinstrumentoutdoorsorin
locationssubjecttorainorwater.
Do Not Remove the Case or Disassemble
Do not open the case except when replacing batteries.
Only qualified YOKOGAWA personnel may remove the
covers and disassemble or alter the instrument. Do not
repair the instrument yourself, as doing so is extremely
dangerous.
 Forinternalinspectionandadjustment,contactyour
nearest YOKOGAWA dealer.
Batteries
• Neveropenthebatterycompartmentwhilea
measurement is in progress.
• Whenopeningthebatterycompartment,turnoffthe
range switch.
• Donotreplacethebatteriesiftheproductiswet.