48
IM MY600-01EN
If you set the reference value to Any, you can manually
set the value.
1. Use the arrow keys to set
the decimal position, and
confirm with the ENTER
button.
2. Use the arrow keys to
adjust the 4th digit number,
and confirm with the
ENTER button.
3. Use the arrow keys to
adjust the 3rd digit number,
and confirm with the
ENTER button.
4. Use the arrow keys to
adjust the 2nd digit number,
and confirm with the
ENTER button.
5. Use the arrow keys to
adjust the 1st digit number,
and confirm with the
ENTER button.
Setting is complete when
and range on the LCD
start blinking.
To go one step back, press the ESC button.
3.
When setting is complete, press ESC. The reference
value is saved, and the instrument returns to standby
mode (The value is retained even if you turn off the
power.)
To Next Page
Loading...
Need help?
General
