York YVWA - Page 119

JOHNSON CONTROLS
119
SECTION 6 - OPERATION
FORM 201.30-ICOM1 (519)
ISSUE DATE: 05/22/2019
6
Remote Current Limit Input
Choose one LIMIT INPUT below, default is DIS-
ABLED:
OPTIONS REMOTE CURRENT LIMIT INPUT
◄ ► DISABLED
OPTIONS REMOTE CURRENT LIMIT INPUT
◄ ► 0.0 TO 10.0 VOLTS DC
OPTIONS REMOTE CURRENT LIMIT INPUT
◄ ► 2.0 TO 10 VOLTS DC
OPTIONS REMOTE CURRENT LIMIT INPUT
◄ ► 0.0 TO 20.0 MILLIAMPS
OPTIONS REMOTE CURRENT LIMIT INPUT
◄ ► 4.0 TO 20.0 MILLIAMPS
OPTIONS COMPRESSOR SELECT
◄ ► WITHOUT VI STEP OR WITH VI STEP
The display (above) will only appear if the CURRENT
LIMIT option is enabled under the UNIT SETUP
MODE.
OPTIONS OPERATING MODE
◄ ► CHILLER OR HEAT PUMP
If the heat pump option is enabled, choose between
chiller and heat pump operating mode.