General Safety Practices
1 - 2
It is the responsibility of the owner to perform a job safety analysis of all hazards associated
with the total environment in which the Zamboni machine will operate and to train all
personnel annually.
The warnings in the manual and on the machine are identied by the symbols:
DANGER!
This safety symbol warns of possible personal injury
or death.
WARNING!
This safety symbol warns of possible personal injury.
CAUTION!
This symbol warns of possible damage that may occur
to the vehicle.
DANGER!
Operations that may cause product damage are
identied on the product and this publication. Zamboni
cannot anticipate every possible circumstance that
might involve potential hazard.
The warnings in this manual and on the machine are therefore not all-inclusive. If a procedure,
tool or work method not specically recommended by Zamboni is used, a competent person
must be consulted to assure the safety of you and others and that the machine will not be
damaged or made unsafe by the procedures you choose. You should also ensure that the
product will not be damaged or made unsafe by the operation, lubrication, maintenance or
repair procedure you choose. When in doubt, call our factory for free consultation and advice.
DANGER!
Do not operate or perform maintenance on this
machine unless you have read and understand the
instructions in THIS MANUAL. Improper machine
operation and maintenance is dangerous and could
result in injury or death. Contact Zamboni for a
free replacement manual. Proper operation and
maintenance is your responsibility.
To Next Page
Loading...