General Safety Practices
1 - 4
• Do not allow anyone to stand or pass under the elevated portion of any
machine.
• Be sure operating surface can safely support machine.
• Observe safety rules when handling fuel on engine powered machines and
when changing or charging batteries for electric machines.
• Never cover, hide or remove any safety label.
• Never stand on the ice making water tank. Damage to the tank and personal
injury may occur.
Crushing or Cutting Prevention
• Support equipment and attachments properly when working beneath them.
• Do not depend on hydraulic cylinders to hold up. Any attachment can fail if
a control is moved or if a hydraulic line breaks.
• Never attempt adjustments while the machine is moving or is running unless
otherwise specied.
• Where there are mechanical linkages, the clearance in the linkage area will
increase or decrease with movement of the assembly.
• Stay clear of all rotating and moving parts.
• Keep objects away from moving fan blades. They will throw or cut any
object or tool that falls or is pushed into them.
• Retainer pins, when struck with force, can y out and injure nearby persons.
Make sure the area is clear of people when striking retainer pins.
• Wear protective glasses when striking a retainer pin to avoid injury to your
eyes.
• Chips or other debris can y off objects when struck. Make sure no one can
be injured by ying debris before striking any object.
• Keep all guards in place and good repair.
Fire or Explosion Prevention
Fuels (Gasoline, Propane - LPG, Compressed Natural Gas - CNG)
DANGER!
Gasoline, LPG , CNG and their vapors are extremely
flammable. LPG and CNG vapors reduce oxygen
available for breathing and may cause suffocation.
Gasoline vapors are extremely ammable and cause
ash res.
Revised Jan/11
To Next Page
Loading...