General Operating and Maintenance Information
2 - 4
Travel on Highways
The machine is not designed for highway use. Fast driving on the highway and bouncing
the vehicle over bumps can seriously damage the machine. Travel over extended distances
should be avoided, if possible. If such travel is required:
• Check local authorities to determine if travelling on highways is permitted.
• Vehicle escort in front of and behind ice resurfacer is recommended.
• Exercise Caution. Obey all trafc signs, signals and laws.
• Make sure that the conditioner is completely raised before driving.
• Do not exceed engine speed of 2500 RPM.
• Do not tow the vehicle for long distances. Transmission damage will occur.
To Next Page
Loading...