7 - 1
Operating the Ice Resurfacer
7.
Operating the Ice Resurfacer
Driving the Machine
Before Driving the Machine
Do not operate this machine before reading and
understanding these instructions and also viewing
the instructional video.
Always operate the machine with the seat adjusted to allow for proper foot pedal action.
Always operate the machine from a seated position.
Do not stand up to operate!
NO RIDERS OR PASSENGERS ARE PERMITTED!
Do not operate the machine if the guards are not in
place or broken.
Vehicle Controls
The Zamboni ice resurfacer has familiar automobile-style driving controls.
The ice resurfacer is steered with the steering wheel. It has two foot pedals, one that
controls the direction and acceleration and the other one is a brake pedal. It has a hydrostatic
transmission that allows for smooth operation.
The machine's ground speed is controlled through the use of the accelerator foot pedal and the
engine RPM. The further the hydrostatic foot pedal is depressed, the faster the machine can
travel. The engine speed (RPM) is controlled by the engine speed switch (See Figure 7.1).
To Next Page
Loading...