Zaxcom Deva 5.8 - Camera Connector, 10 Pin (Deva 5.8); Power Connector

42
Deva 5.8 and Deva 16 Owner’s Manual
Chapter 4
Camera Connector, 10 Pin (Deva 5.8)
On the Deva 5.8, a Hirose 10-pin connector is provided as a camera output and a camera return into the
Deva 5.8 recorder. Balanced analog outputs channels 5 and 6 on pins 1-4. Camera returns 1 and 2 on pins
5 and 7, these are summed to mono in the Deva.
Power Connector
The Power Connector on the Deva is a standard 4 pin XLR connector (A4F) available at most electronic
stores. The Deva requires a power source of 9.5 to 18 VDC, 1 A.
Pin Signal Description Notes
1 Channel 5
2
3 Channel 6
4
5 Camera return 1 Summed to mono
with camera return 2
6 N/C
7 Camera return 2 Summed to mono
with camera return 1
8 N/C
9 N/C
10 N/C
Pin Signal Description
1 -9.5 to -18 VDC (-)
2 N/C
3 N/C
4 +9.5 to +18 VDC (+)