Zebra 105Se - Calibrate 3-6; Darken 3-6; Data 3-6; Paper;Ribbon 3-6

MODE Key
The MODE key puts the printer in Configuration Mode. In this mode,
you can adjust the Print Darkness, Media Tear-Off Position, and Label
TopPosition,orperformaCalibration.See“ConfigurationandCali-
bration.”
Front Panel Lights
RefertoFigure3.1forthelocationofthelights.
Note: If an operating condition which causes a light to be ON
constantly and one which causes the same light to flash occur
simultaneously, the light flashes.
Zebra S-Series User’s Guide 3-5
41