Indicator Light
Name Status Indication
POWER ON Printer is ON.
PRINTHEAD
OFF Normal operation.
ON
Head Over Temperature condition. Printing stops until the printhead
cools down. Printing resumes automatically.
Printhead Under Temperature condition. Printing continues.
Power Supply Over Temperature condition. Printing stops until the
power supply cools down. Printing resumes automatically.
Flashing Printhead Open.
PAPER/
RIBBON
OFF Media and ribbon (if used) are properly loaded.
ON Paper out.
Flashing 1. In Thermal Transfer Mode: Ribbon is out.
2. In Direct Thermal Mode: Ribbon is in the printer.
PAUSE OFF Normal operation.
ON Printer has stopped all printing operations.
DATA
OFF Normal operation, no data being received.
ON Labels are printing.
Single flash The
CANCEL
key was pressed and a format was successfully deleted
from the print queue.
Flashing Receiving data from host computer.
Slow
flashing
Printer sent a stop transmitting command to the host computer.
DARKEN ON
Printer is in the Configuration Mode. See Configuration and Calibra-
tion for more information.
POSITION ON
CALIBRATE ON
3-6 Zebra S-Series User’s Guide
42
To Next Page
Loading...