Zebra 105Se - Label Formats 3-14; Sample Label Formats 3-14

FEED Key and CANCEL Key Test
This test prints seven pre-programmed label formats at different speeds.
The printer automatically pauses after each format. The sequence of la-
bel formats is as follows:
* “C” for the 105Se with the 300 dots/inch printhead
Extended Printer Diagnostics
Extended diagnostic tests are available. The maintenance manual,
Vol. 1: General Maintenance (part # 38452L), provides the information
needed to perform these additional tests.
Zebra S-Series User’s Guide 3-13
Label Format Quantity
Inches
per second
Left Ribbon Wrinkle Test
20 D*
Right Ribbon Wrinkle Test
20 D*
C39 Wrinkle Test
20 D*
Left Ribbon Wrinkle Test
20 A
Right Ribbon Wrinkle Test
20 A
C39 Wrinkle Test
20 A
Usable Area Test
10 D*
Head Temperature Test
10 D*
Upper Smear Test
10 D*
Lower Smear Test
10 D*
Usable Area Test
10 A
Head Temperature Test
10 A
Upper Smear Test
10 A
Lower Smear Test
10 A
49