SYMPTOM DIAGNOSIS ACTION
For printers with the Cutter
Option installed:
Printing
stops. PAPER/RIBBON,
PAUSE, and CANCEL LEDs
on.
Media jammed in Cutter. Remove media, clean Cutter Module.
Connecting cable not con-
nected to Cutter Module.
Plug cable into Cutter Module.
Cutter Module is dirty. Clean Cutter Module.
End of the media is not posi-
tioned correctly on top of the
platen.
Re-position media so that the end is on
top of the platen.
Zebra S-Series User’s Guide 8-5
79
To Next Page
Loading...