156 Operation
G-30-1529-en OPMI® VISU 160 on S8, S81 & S88 Suspension Systems Issue 5.0
Printed on 09. 10. 2006
Positioning the S88 floor stand
Note:
Please also read the chapter: "Relocating the stand", page 138.
• Unlock brake tab (2).
• Use maneuvering handle (1) to move the stand to the site of use.
Make sure that movement is not obstructed by the power cord and the
cable of the foot control panel.
Caution:
Press down brake tab (2) and make sure that the stand is securely locked
in position and cannot roll away by itself.
To Next Page
Loading...
