G-30-1529-en OPMI® VISU 160 on S8, S81 & S88 Suspension Systems Issue 5.0
Printed on 09. 10. 2006
Maintenance / Further information 203
Disinfecting the control keys
To be able to use the system in the OR, for example, it may be necessary
to disinfect the control keys. We recommend using MELISEPTOL disin-
fectant solution (B. Braun, Melsungen AG). Carl Zeiss keeps MELI-
SEPTOL in stock, and you can also obtain it locally in many countries
from representatives of B. Braun, Melsungen AG.
Warning!
– Wear disposable plastic gloves to prevent skin contact with the disin-
fectant.
– MELISEPTOL is inflammable (flame point at 31 °C). Please read the
product information from B. Braun, Melsungen AG.
To apply MELISEPTOL, proceed as follows:
• Switch off the unit before disinfecting.
• Apply the disinfectant across the entire surface of the control panel.
Do not let any disinfectant seep into the unit.
• Leave the disinfectant on the unit for approx. 30 minutes.
• Then carefully wipe the disinfectant off the surface using a sterile, lint-
free cloth.
• Dispose of the gloves and cloth as normal waste.
You can obtain the following articles from Carl Zeiss:
Disposable gloves:
Cat. No.
1 l MELISEPTOL in vario bottle 000000-0103-907
MELISEPTOL HBV spray, 250 ml 000000-0103-910
MELISEPTOL HBV cloths 000000-0103-911
Size 1 (large) size 8-9 000000-0117-736
Size 2 (medium) size 7-8 000000-0117-737
To Next Page
Loading...
