G-30-1529-en OPMIĀ® VISU 160 on S8, S81 & S88 Suspension Systems Issue 5.0
Printed on 09. 10. 2006
Operation 169
FOC-MEM To save a new focus position, press the key configured for
this purpose for longer than 2 seconds. A beep is emitted
when the new position has been saved.
To move to a stored focus position, press the key config-
ured for this purpose only briefly (less than 2 seconds).
You can stop this process at any point by briefly tipping on
the appropriate key on the foot control panel (C or D) or on
one of the direction keys (joystick or one of the two rocker
switches).
AUX Triggers an AUX signal, e.g. for switching an external unit
on or off.
PHOTO Triggers the shutter of a 35 mm camera, if connected.
To Next Page
Loading...
