Overview
Connecting Two IP Gateways
Overview
This chapter describes how to connect and configure the links for two Model 6300 IP
Gateways in order for them to operate over Local Area Network (LAN) or a Wide Area
Network (WAN).
Configuring Two IP Gateways on a Local Area Network (LAN)
This section describes how to connect and configure the links for two Model 6300 IP
Gateways in order for them to operate over a single subnet of a Local Area Network
(LAN). In a LAN configuration, there are typically one or more IP switches and/or
routers used to interconnect the devices. The following figure shows a diagram of a
typical scenario.
31
To Next Page
Loading...